2-SPEED SET (Double Bearing Type)
商品説明
IF15-2の2スピードユニットが耐久性、信頼性向上で大幅進化! アルミ製新型2速スパーギヤハウジングを一新し、異なるサイズのベアリングを2個使用することで従来のものよりも支持精度が高まり、スパーギヤの振れやガタつきを最小限にします。ギヤハウジングは内径を0.1mm小さくすることで新規2スピードシューとの相乗効果でメリハリのあるしっかりとした変速フィーリングを実現。表面には硬質メッキ処理を施し2速シューとの接触面は長期に渡ってクリーンに保たれます。変速タイミング調整用穴は回転バランスを考慮し2ヶ所設定。調整用ビスは軽量高精度なチタン製切削ビスを採用しました。スチール製の2速ハブも新設計。これまでよりもシャフトへ固定するセットスクリュー周囲の肉厚を増し強度アップ。ウェイトはローラーウェイト方式となり安定した変速タイミングを長期維持します。これらの変更でも従来の2スピードユニットと比較して僅か0.3gの重量増で抑えられる軽量仕様です。
商品仕様
| 製品名: | 2-SPEED SET (Double Bearing Type) |
|---|---|
| 型番: | G307 |
| JANコード: | 4582739938510 |
| メーカー: | INFINIY |
注1 : この2スピードセットに使用できる2速スパーギヤは形状変更したものが以前より流通しております。お手持ちのものをご確認いただき、画像(左側)の形状のものをご使用ください。(ベアリング穴周囲の突起をカットすることで以前のものも使用可能にはなります)
注2 : OS12TGエンジン使用の場合、スプリングは「SMJ1156 1/10GPツーリングカー用2スピードスプリング(ソフト/2個)」を別途ご用意ください。
The IF15-2 2-speed unit has evolved significantly, delivering greatly improved durability and reliability!
Featuring a redesigned aluminum 2nd spur gear housing that utilizes two different-sized bearings, it achieves higher support precision than conventional designs, minimizing spur gear runout and play. Reducing the inner diameter of the gear housing by 0.1 mm works together with the new 2-speed shoes to produce a crisp, positive shift feel. The hard-plated surface finish keeps the contact face with the 2nd gear shoe clean over extended use. Two shift-timing adjustment holes are positioned for optimal rotational balance, equipped with lightweight, high-precision machined titanium adjustment screws.
The steel 2nd gear hub is also newly designed. The wall thickness around the set screw that secures the hub to the shaft has been reinforced for higher strength. Incorporating a roller weight system ensures consistent, stable shift timing over long runs. Despite these enhancements, this lightweight design limits the weight increase to a mere 0.3 g compared to the conventional 2-speed unit.
Note 1: Compatible 2nd spur gears with an updated profile have already been in circulation. Please inspect your parts and use the gear shape shown in the image. (Previous versions can also be used by trimming off the protrusion around the bearing hole.)
Note 2: When using an O.S. 12TG engine, please separately obtain the "SMJ1156 2-Speed Spring for 1/10 GP Touring Car (Soft / 2 pcs)".




